- Need Help!- Fiber Laser Selection Recommendation And Insight
-
Fiber Laser Selection Recommendation And Insight
We are looking at purchasing a new fiber laser with a 5x10' bed along with a tube attachment. Ideally we would like to be able to cut 3/4" mild steel, 1/2" stainless and 1/2" aluminum, but most of our sheet materials will be 1/4" or thinner. Basically that puts us in the 4-6kW range depending on who you ask.
Due to our budget we are likely looking at a foreign made machine, but finding any reviews on machines has been a struggle. Below our the companies we have found that have a machine that fits these basic parameters, but I was curious if anyone had any feedback or suggestions on any company they are familiar with. Thanks!
Bodor
HSG Laser
Gweike
KRRASS
XT Laser
Golden Laser
Similar Threads:
-
-
Member
Re: Fiber Laser Selection Recommendation And Insight
Take a look at Senfeng Laser as well. We recently purchased a 5x10 laser from them and we have been happy with our purchase so far. Their lasers are well built and very cost effective. They have a US location in LA California and they are getting ready to open up a another showroom in Chicago. They also have multiple technicians handling the US.
- Need Help!- Fiber Laser Selection Recommendation And Insight
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules