trumpf trulaser l3030 fiber


Results 1 to 2 of 2

Thread: trumpf trulaser l3030 fiber

  1. #1
    Nielske93's Avatar
    Join Date
    Aug 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default trumpf trulaser l3030 fiber

    Shortly we have a new laser cutting machine from trumpf. (the l3030 fiber)
    Most of the standard setting work well but i have an issue with cutting aluminum diamond plates 2.5/4 and 3/5 mm thick.

    wich settings and nozzle do u guys use for these plates.

    Greetings Nielske93.



  2. #2

    Default Re: trumpf trulaser l3030 fiber

    Are you measuring the thickness of the Diamond and using that tech table? For 1/8" Diamond plate I use the 3/16 tech table. You can also put the sheet on upside down, That some times helps.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

trumpf trulaser l3030 fiber

trumpf trulaser l3030 fiber