- Problem- Cutting punch on Robofil EDM
-
Member
Cutting punch on Robofil EDM
Hello,
We are making stamps and cutting dies. We sometimes having problem to fit them together. We cut punch in one pass with E2 (Rough is 2.8 RA) cutting technology. My question is how other people cut punches? I saw on manual book that to cut punch they use cutting tabs, and E2 (Raugh) E7 (Finish RA 2.0 ) and E10 (Ra 1.0 ) technologies to get straight vertical geometry and dimensions. There is function on the mastercam to set tabs, but i don't know how to use it properly.
Similar Threads:
-
- Problem- Cutting punch on Robofil EDM
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules