- Charmilles Robofil 400 disk format error
-
Member
Charmilles Robofil 400 disk format error
Dear EDM users,
I have an old Charmilles Robofil 400 machine. I have a problem. The machine was not used for a long time, and does not start. I try to reinstall the system from disk but don't work.
I rehearsed these steps:
1. I switch on to main power
2. pushed continuously the button load floppy try to load
but I come this error message: Loading # CKS error format
I try to change floppy to same type but don't work nothing, like this can be excluded the mistake of the floppy.
What may be the problem, hardware, eprom, floppy cable?
Please help,
Thanks your attention.
Best Regards,
Similar Threads:
-
-
Member
Re: Charmilles Robofil 400 disk format error
Disk drive or disk.
The machine is not getting the exact amount of bits the Data the eprom says it should get
Maybe bad area at end of disk read
We repair these machines daily
We can help with any charmilles edms
Greatlakeswirerepair@gmail.com
Sent from my SM-G975U using Tapatalk
-
Member
Re: Charmilles Robofil 400 disk format error
Sometimes I use the old diag disk to prove the drive works or not bc the diag disk is usually in great condition and if that works then you know you just need a new software disk
Justin purdun
Sent from my SM-G975U using Tapatalk
- Charmilles Robofil 400 disk format error
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules