Need Help! Mitsubishi FX10K - U700 error


Results 1 to 3 of 3

Thread: Mitsubishi FX10K - U700 error

  1. #1
    Registered
    Join Date
    Jul 2015
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Mitsubishi FX10K - U700 error

    Hello!

    I have problem with Mitsubishi FX10K from 2001, on pressing ready button U700 error is appearing.
    I have found out that BKO-R8784 give only 240V, 150V only appear for 1s and fade to 0v after power is turned on and off.
    What can cause this problem? Is there any solution?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2015
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Mitsubishi FX10K - U700 error

    Problem was power supply controling board, one of resistor solder path near connector to power supply was broken.



  3. #3
    Member tuncerdemirtas1974td's Avatar
    Join Date
    Dec 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by 4d53 View Post
    Problem was power supply controling board, one of resistor solder path near connector to power supply was broken.

    I also have an FX 20K wire erosion machine. U700 gives wrong PWR SUP error. Could it be the same problem as yours? Can you help me. Can you send a photo of where this card is? I would really appreciate if you can help.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mitsubishi FX10K - U700 error

Mitsubishi FX10K - U700 error