New member long time reader here with a question for you guys, any help is greatly appreciated. We have a newer RAM EDM Agie Charmilles form 20 (2014-2015ish I believe) at the shop which I have read every book and manual we have here on and can't seem to figure out how to make the electrode undersize greater than .0787 In.. My goal is only to do a circular orbit up to and no greater than .250 all the way down to the desired depth. No matter what I do or change (radius / +w / transitional rad / etc.) The machine will not orbit out further than .0787 which is the max undersize of an electrode that can be entered. Thanks in advance!

Similar Threads: