If anyone remembers the code to enter the service menu under Monitor that would be a plus.
The machine started slowing down and using more wire than normal and faulted on us a couple times with this message.
E02 P01?
So I loaded the Auto-Diagnostic software into the machine and the CNC control passed everything but the Generator Chain failed. Charmilles recently discontinued support for this machine and it’s been such a solid machine I don’t have any other service contacts for Charmilles.
Diagnostic Summary:
Error Details:
Generator Boards are:
852449 UPH1-2
852447 UP1-4 should be OK }
852447 UP1-4 should be OK } I have a spare and when cycling the three boards through every spot the errors never change.
Auto-Diagnostic Version: G-16
System Software: MK3.1B 1/24/97
Any help is appreciated,
John
Similar Threads:
If anyone remembers the code to enter the service menu under Monitor that would be a plus.
hi
E02 P01? is a 24 vdc failure usually.......
i can repair UP/UPH boards if you can t-shoot it down to that
mac
Registered Linux User #348337
EMC2 Rocks!!!!
I am based in India. I have a Robofil 200 and having the same problem. After loading the Communication disk the screen goes blank with this message E02 P01 ? at the bottom. Is this related to 24volts output. Have you found the solution to this problem. If so please pass on the details.
Thanking You
Yogesh.