Problem Charmilles Roboform 30 C axis lack of reference


Results 1 to 3 of 3

Thread: Charmilles Roboform 30 C axis lack of reference

  1. #1
    Registered
    Join Date
    Aug 2012
    Location
    Phillipines
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Charmilles Roboform 30 C axis lack of reference

    Good Day!

    Is there anyone have roboform 30 and encountered C axis zero return problem?

    I am new to this EDM, first time to troubleshoot and analyze the problem.

    When we input command like : com> AREF the Y,Z,X axis are ok during auto reference checking but when C axis turn it proximity sensor trigger @ 181 degrees, rotation continue until 241 degrees and stop there, i think it should be stop at 360 degrees and zero the machine axis position. Now the electrode are angled even we already reset and load again the system nothing change.

    I don't want to mess up with the EDM if i check the electrical or sensor system or either the board inside it without knowing exactly what should i check first?

    We don't have any maintenance manual except for operating manual..

    any help from the expert and experience in EDM operation would be greatly appreciate!!!

    Similar Threads:


  2. #2

    Default

    Quote Originally Posted by roymanvega View Post
    Good Day!

    Is there anyone have roboform 30 and encountered C axis zero return problem?

    I am new to this EDM, first time to troubleshoot and analyze the problem.

    When we input command like : com> AREF the Y,Z,X axis are ok during auto reference checking but when C axis turn it proximity sensor trigger @ 181 degrees, rotation continue until 241 degrees and stop there, i think it should be stop at 360 degrees and zero the machine axis position. Now the electrode are angled even we already reset and load again the system nothing change.

    I don't want to mess up with the EDM if i check the electrical or sensor system or either the board inside it without knowing exactly what should i check first?

    We don't have any maintenance manual except for operating manual..

    any help from the expert and experience in EDM operation would be greatly appreciate!!!
    Hi Dear
    I need the operating manual of the roboform 30 in English .
    Then I can help you .
    I have baught the same machine but can not start it up .
    The monitor remains black after nc start .
    The six green leds on AU-SLA-REST Card is on .
    The keyboard doese not work except shift , control , tab keys.
    Regards



  3. #3
    Community Moderator wendtmk's Avatar
    Join Date
    Dec 2005
    Location
    USA
    Posts
    565
    Downloads
    0
    Uploads
    0

    Default Re: Charmilles Roboform 30 C axis lack of reference

    You do realize this is an 8 year old post and the member who started this topic hasn't posted since 2014? Doubt you'll get a response from that member.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Charmilles Roboform 30 C axis lack of reference

Charmilles Roboform 30 C axis lack of reference

Charmilles Roboform 30 C axis lack of reference