About Us | PECM Systems
Speak to Steve
I have an edm machine of M/S sykes machine tool co. ltd.Technical center bedford avenue,Slough Berkshire SLI 4RY. UK. Of following specifications
1. machine MINIM
2. generator - 901
3. S. No 320024
4. MECRODE , Microspark 901 S. No 9014114, 45A. The 600 group.
Question
1. Machine generator becomes ON. Z-axis moves up and down touching electrode with workpiece but no sparking occurs , ampere meter do not move.
Can someone help to troubleshoot the fault . Need maintenance manual and electric circuit diagram.
Similar Threads:
About Us | PECM Systems
Speak to Steve
Hi,
I have same machine I bought form Germany last year .I just start to install but I need manuals .I have the computer with software under win98 but I do not know how to work with the machine and software.The machine seams working.I start some program from memory and machine work but I need help with cnc work .
Cold you help me?
Regards
If you want i scan the electric chart and send to you !
Regards
Hello
I saw your post about Mecrode edm on this site, although it is from 2009!
I am struggling to repair some electrical parts on my Mecrode Minor. Would you still have a scan of the wiring for a Mecrode edm. Any help greatly appreciated.
Regards
John
Thanks for your quick reply. Would you be able to send me a photo of the "power board" - it's the bit that supplies the head, and would comprise several large transistors, resistors and capacitors. If I can work out how I will post a picture of my broken board. I think it has some components missing, and I have already identified a missing capacitor!
Thank you & regards. John
Hi.
I think I found the components on Ebay and fixed it, but have since replaced it with a Charmilles machine.
John