Best way to get a 100:1 arc voltage out of Powermax 85


Results 1 to 2 of 2

Thread: Best way to get a 100:1 arc voltage out of Powermax 85

  1. #1
    Member SSOKIE's Avatar
    Join Date
    May 2016
    Location
    Edmond, OK
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Best way to get a 100:1 arc voltage out of Powermax 85

    I'm surprised I can't find anywhere this has been mentioned before here, but I have searched up and down and can't find it, so...

    What's the simplest and/or best way to get a 100:1 signal from a Powermax 85 divider board?

    I realize a 100:1 signal is not the best to use but I'd still like to know.

    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2013
    Posts
    4282
    Downloads
    0
    Uploads
    0

    Default Re: Best way to get a 100:1 arc voltage out of Powermax 85

    Hi,
    Hypertherm machines typically have a 50:1 divider. If you really must have a 100:1 then just add a 2:1 divider at the output of the 50:1.

    Craig



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Best way to get a 100:1 arc voltage out of Powermax 85

Best way to get a 100:1 arc voltage out of Powermax 85