Need Help! Plasma Table Manufacturer Vanished, what now?


Results 1 to 4 of 4

Thread: Plasma Table Manufacturer Vanished, what now?

  1. #1
    Member
    Join Date
    Sep 2017
    Location
    United States
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Plasma Table Manufacturer Vanished, what now?

    The manufacturer of the plasma table we use vanished, website gone, phones unanswered, BBB complaints unresolved and flagged with a warning. Is there a.. generic repair tech service? We apparently have a problem with the control board and no idea what to do about it.

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    5250
    Downloads
    0
    Uploads
    0

    Default Re: Plasma Table Manufacturer Vanished, what now?

    Did it have a brand name? Is there any identification on the control board? They might have used a board they didn't make themselves, in which case you'd have an easier task of repair or replacement.

    Andrew Werby
    https://computersculpture.com/


  3. #3
    Member
    Join Date
    Sep 2017
    Location
    United States
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Plasma Table Manufacturer Vanished, what now?

    EZ Cut. I'll have to go take it apart and check the controller, but I think it was also labeled with their brand name. If it's theirs, I'm worried that my chances of another manufacturer being willing to support us is... not great. I'm also not sure how difficult it is to switch from their software to something else. I've been ignoring bugs up until now in the vague hope that they'd let me get a patch someday, but that's apparently not going to happen. I could never get their techs to share a technical manual or a wiring diagram.



  4. #4
    wee-goat's Avatar
    Join Date
    Jun 2019
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Plasma Table Manufacturer Vanished, what now?

    If you are U.k based try Techserv in Huddersfield, they make their own machines and software and retrofit their control to 3rd party machines, it is very easy software to use, they have a facebook page if you want to check them out.



  5. #5
    Member
    Join Date
    Sep 2017
    Location
    United States
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Plasma Table Manufacturer Vanished, what now?

    MidWest USA here



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Plasma Table Manufacturer Vanished, what now?

Plasma Table Manufacturer Vanished, what now?

Plasma Table Manufacturer Vanished, what now?