Need Help! DIY CNC Plasma Build Help


Results 1 to 2 of 2

Thread: DIY CNC Plasma Build Help

  1. #1
    Activation process cw1126's Avatar
    Join Date
    Nov 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default DIY CNC Plasma Build Help

    So I just built a 5x4 cnc plasma. I am using a Lotos LTP5500D Blowback Non HF Cutter. I am using Nema 23 high torque steppers with Sainsmart Stepper drivers. I have everything working except my THC. I have a cheap Chinese breakoutboard with parallel connection to Mach3 PC. I have been doing some research and it seems like my BOB doesnt support THC. I bought the Polabs Sensout THC.

    I am just wondering what BOB I should buy that would support THC? I have built multiple CNC routers and laser cutters and always just use the cheap chinese bob and everything works fine. So during my new research I see that alot of people are using these ethernet motion controllers along with a bob. Any suggestions on which combination I should buy would be great.

    Thanks,

    Charlie

    Similar Threads:


  2. #2
    Activation process cw1126's Avatar
    Join Date
    Nov 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: DIY CNC Plasma Build Help

    Nevermind. I got it to work. Now for dialing it in.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DIY CNC Plasma Build Help

DIY CNC Plasma Build Help