Hi
Has anybody had any dealings with dangling
Plasma CNC controllers
I have been looking at a F2500TF-B controller,
They sent me a manual of it,
It looks pretty good, as it seems to have a lot of stuff built into it,
ie,
THC
Rewind on a cut
Plasma or gas cutting options. Etc
Just wondering how good they are,
Or they troublesome,
Or would I be better stick with sheetcam and Mach3
It is a config for LinuxCNC and has support for internal THC using a cheap Mesa THCAD10. It can also be used with any breakout board as long as it had enough I/O.
Its the most affordable(free), most functional plasma cutting software ever made. Its constantly under development and getting better all the time.