Fangling controller

[Dem1]

Hi
Has anybody had any dealings with dangling
Plasma CNC controllers

I have been looking at a F2500TF-B controller,
They sent me a manual of it,
It looks pretty good, as it seems to have a lot of stuff built into it,
ie,
THC
Rewind on a cut
Plasma or gas cutting options. Etc

Just wondering how good they are,
Or they troublesome,
Or would I be better stick with sheetcam and Mach3

Similar Threads:

• postprocessor for START/ FANGLING control
• New Machine Build- Arduino 2560 + Mach3 Controller + TB6560 4 Axis 3.5A Stepper Driver Board Controller
• New Product- Stand Alone Plasma Torch Height Controller (Kyndill Controller)
• DIY Controller laser Arduino Vs Controller general (mach3)
• Thinking of Converting my Mill's Anilam Controller to a Larken Based Controller..

[TheFabricator03]

Have a look at this,

PlasmaC User Guide

It is a config for LinuxCNC and has support for internal THC using a cheap Mesa THCAD10. It can also be used with any breakout board as long as it had enough I/O.

Its the most affordable(free), most functional plasma cutting software ever made. Its constantly under development and getting better all the time.