Fangling controller


Results 1 to 2 of 2

Thread: Fangling controller

  1. #1
    Member Dem1's Avatar
    Join Date
    Sep 2019
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default Fangling controller

    Hi
    Has anybody had any dealings with dangling
    Plasma CNC controllers

    I have been looking at a F2500TF-B controller,
    They sent me a manual of it,
    It looks pretty good, as it seems to have a lot of stuff built into it,
    ie,
    THC
    Rewind on a cut
    Plasma or gas cutting options. Etc

    Just wondering how good they are,
    Or they troublesome,
    Or would I be better stick with sheetcam and Mach3

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2013
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Fangling controller

    Have a look at this,

    PlasmaC User Guide

    It is a config for LinuxCNC and has support for internal THC using a cheap Mesa THCAD10. It can also be used with any breakout board as long as it had enough I/O.

    Its the most affordable(free), most functional plasma cutting software ever made. Its constantly under development and getting better all the time.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Fangling controller

Fangling controller

Fangling controller