Reply with QuoteI posted on a Facebook group and a member there suggested them. I may try them out for my plasma table build. I am a total newb but looking at the manual they seem simple enough for what I am doing. Home Fab not production.
Proma Plasma Controller with THC - New
Anyone using this yet?
MyPlasm CNC System – Proma Elektronika
Neal
Similar Threads:
- Issues Cutting Thin Materials - Proma Compact THC Controller SD
- CNC Plasma Proma torch heigh control step dir
- Proma 150 THC (Torch Height Controller) for Plasma CNC
- Need Help!- Proma SD + Mach3 + plasma CUT50L (chinese) + M3/M5 macro + detect material + AHX-MK4
- Pro Grade Gecko G540 Plasma System With Proma THC 150....(New Product)
Re: Proma Plasma Controller with THC - New
I posted on a Facebook group and a member there suggested them. I may try them out for my plasma table build. I am a total newb but looking at the manual they seem simple enough for what I am doing. Home Fab not production.
Re: Proma Plasma Controller with THC - New
I have used several systems before so I can compare it to others. It is the easiest system to use and far the best. And surprisingly the THC inside of this unit is very relaible. Surprisingly because their Proma 150THC is a toy. I can only recomend it !
Re: Proma Plasma Controller with THC - New
Be sure to look at Linuxcnc's Plasmac. It can work with a Proma but you get much better control with a $70 Mesa THCAD interface (preferably with a Mesa 7i96 or 7i76e)
Rod Webster
www.vmn.com.au
