Anouncement regarding plasma and Linuxcnc


Results 1 to 9 of 9

Thread: Anouncement regarding plasma and Linuxcnc

  1. #1
    Member
    Join Date
    Jun 2009
    Location
    Kosova
    Posts
    246
    Downloads
    0
    Uploads
    0

    Default Anouncement regarding plasma and Linuxcnc

    This is to inform you that there have been some major developments in Linuxcnc regarding plasma cutting and THC control lately that you might want to check.
    More info at forum.linuxcnc.org
    Admins, if this infringes on any use policy, please delete this post.
    Thank you.

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2005
    Location
    Indonesia
    Posts
    1086
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    Hi Tom,
    What we need to buy to run linux stepper or servo ?



  3. #3
    Member
    Join Date
    May 2015
    Location
    Australia
    Posts
    345
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    Quote Originally Posted by asuratman View Post
    Hi Tom,
    What we need to buy to run linux stepper or servo ?
    You can use either. It just needs a different controller board. Tommy is the master of budget builds and I know he favours high quality steppers. Others are using Servos with good results. Go to the main LinuxCNC site and follow your nose to the HTML Documents for V 2.8 (which will soon become the release version) or V 2.9 (the development version) and look at the chapters for the PlasmaC User Guide and the Plasma Cutting Primer for LinuxCNC Users for more info.

    What sets LinuxCNC's Plasmac configuration apart is that its much more than a THC, its a complete plasma controller that uses LinuxCNC's motion controller to manage the THC function and a custom plasma controller screen. Plasmac is so tightly integrated into the overall system, nothing gets close to matching its feature set. or its performance. For less than $200 of hardware, you can have a complete plasma controller with integrated high performance THC. But if you have a Proma or other similar external THC, that's OK, you can use it too!

    Furthermore, there has never been a better documented LinuxCNC configuration in the history of the open source project.

    I've ordered a bunch of parts today and hope to be building a reference controller which hope will be fully documented as part of this major development.

    Rod Webster
    www.vehiclemods.net.au


  4. #4
    Member
    Join Date
    Nov 2013
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    I have been using the PlasmaC branch for about two months now running a production machine, All I can say is that PlasmaC is miles ahead of other linuxCNC plasma controllers,

    I have had a lot of drama getting the CandCNC system I brought running reliably in a industrial setting so I built my own controller using Mesa cards and PlasmaC and it has been the best thing I could of done,

    I have attached some pictures of the sheets I have cut using PlasmaC, The integrated THC from using a Mesa THCAD10 works just as well if not better than any proprietary THC.

    Anouncement regarding plasma and Linuxcnc-20190707_183911-jpg
    Anouncement regarding plasma and Linuxcnc-20190711_163833-jpg
    Anouncement regarding plasma and Linuxcnc-20190717_142227-jpg
    Anouncement regarding plasma and Linuxcnc-20190717_142238-jpg
    Anouncement regarding plasma and Linuxcnc-20190717_142256-jpg
    Anouncement regarding plasma and Linuxcnc-20190717_142305-jpg
    Anouncement regarding plasma and Linuxcnc-20190719_173305-jpg



  5. #5
    Member
    Join Date
    May 2015
    Location
    Australia
    Posts
    345
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    TheFabricator03, thats really interesting. How thick is that material and how far did it warp? And did the plasmac config control the torch height under those conditions well?

    I found plasmac pretty good with thin material as this video shows but you are cutting much thicker material.



    Rod Webster
    www.vehiclemods.net.au


  6. #6
    Member
    Join Date
    Nov 2013
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    Quote Originally Posted by rodw View Post
    TheFabricator03, thats really interesting. How thick is that material and how far did it warp? And did the plasmac config control the torch height under those conditions well?


    rodw,

    That material that warped was 16mm thick. It roughly warped up about 40mm and yes PlasmaC's integrated torch height control handled it with out any drama. I have cut everything from 1.6mm sheet to 25mm thick plate with out any problems.

    I cannot speak highly enough of the development. Even the learning curve to get Linux set up was not too difficult. I find it very stable and easy to use.



  7. #7
    Member
    Join Date
    Jun 2009
    Location
    Kosova
    Posts
    246
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    You can use stepper and servo drives with Linuxcnc, analog or step/dir type, with analog drives you get the loop closed in Linuxcnc so even when something goes wrong you know what hapoened and by how much.
    Also Linuxcnc is a realtime controller so when something goes wrong it will stop the machine in 1/1000 of a second, and even that can be made much faster up to 1/4000 second.
    What machine are you planing to build ?



  8. #8
    Member
    Join Date
    Sep 2005
    Location
    Indonesia
    Posts
    1086
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    I plan to make plasma like Rodw did ...



  9. #9
    Member
    Join Date
    May 2015
    Location
    Australia
    Posts
    345
    Downloads
    0
    Uploads
    0

    Default Re: Anouncement regarding plasma and Linuxcnc

    Quote Originally Posted by asuratman View Post
    I plan to make plasma like Rodw did ...
    Thank you. i have not shared much about my machine on this forum. I hope you build it a bit quicker than I have! But I did make one more piece yesterday.

    Rod Webster
    www.vehiclemods.net.au


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anouncement regarding plasma and Linuxcnc

Anouncement regarding plasma and Linuxcnc