Mastercam Post Proccessor for Plasmaroutecnc BlazeHD


Results 1 to 2 of 2

Thread: Mastercam Post Proccessor for Plasmaroutecnc BlazeHD

  1. #1
    mrbullfrog80's Avatar
    Join Date
    Dec 2018
    Location
    Knoxville
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Mastercam Post Proccessor for Plasmaroutecnc BlazeHD

    I have a friend who has a BlazeHD, and I believe I can tech him how to use mastercam. Can anyone tell me where I can find a post processor for mastercam for this table?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2005
    Location
    USA
    Posts
    2414
    Downloads
    0
    Uploads
    0

    Default Re: Mastercam Post Proccessor for Plasmaroutecnc BlazeHD

    Quote Originally Posted by mrbullfrog80 View Post
    I have a friend who has a BlazeHD, and I believe I can tech him how to use mastercam. Can anyone tell me where I can find a post processor for mastercam for this table?
    Its a MACH3 based controller. Gotta ask why though....MasterCAM is thousands of dollars unless you have a pirated copy. Its really powerful but not easy to learn. Plasma cutting is really simple 2D profile cutting with artwork that can be done in several low cost or free drawing programs. As for CAM he probably already has POSTs for SheetCAM and if not there are several that will work for MACH with Plasma and THC> As for routing 3D you need to look at Vcarve Pro that is a combo drawing and CAM package . They have a POST for MACH



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mastercam Post Proccessor for Plasmaroutecnc BlazeHD

Mastercam Post Proccessor for Plasmaroutecnc BlazeHD