THC Upgrade for old torchmate?


Results 1 to 2 of 2

Thread: THC Upgrade for old torchmate?

  1. #1
    Registered
    Join Date
    Apr 2014
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default THC Upgrade for old torchmate?

    hey everyone, i have an old torchmate 2 table, and a brand new hypertherm 45xp. i have the original redscreen height controller. the thc is a pile. i really want to change it out for a universal height controller but don't know exactly what i can use. ohmic sensing would be amazing also.

    any suggestions?

    Dev

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2006
    Location
    TURKEY
    Posts
    51
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by stompjrkz400 View Post
    hey everyone, i have an old torchmate 2 table, and a brand new hypertherm 45xp. i have the original redscreen height controller. the thc is a pile. i really want to change it out for a universal height controller but don't know exactly what i can use. ohmic sensing would be amazing also.

    any suggestions?

    Dev
    You can use Cap04 with your existing red display THC.
    http://www.agelkom.com.tr/prod031.htm
    Or Stand Alone THC with CapStp11
    http://www.agelkom.com.tr/stepper_motor_interface.htm



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

THC Upgrade for old torchmate?

THC Upgrade for old torchmate?

THC Upgrade for old torchmate?