Hi,
I have a Mach3 usb controller https://www.hobbytronics.co.za/p/979...ion-controller .
The last thing I need to complete my build is a torch height controller, do you guys have any recommendations that will work with my controller board?
Also, I am from South Africa, I cant find THC in my country. So from where can I import it?
Similar Threads:
For a low cost one do a search for Proma Torch Height Controllers. They have a couple different models that may work. Also just do a Ebay search. There are a number of different models and types listed. Also CandCNC has a lot of positive comments from folks who have their THC setup.
Some info here:
https://www.plasmaspider.com/viewtopic.php?f=55&t=27023
http://www.forum.cncdrive.com/viewtopic.php?f=16&t=1615&start=10
Worth a read to consider
You could consider contacting Marius at Blue Arc Cnc
He's in your country and is very knowledeable about plasma.
Rod Webster
www.vmn.com.au