Reply with QuoteNo, UCCNC can only use CNC Drive boards.
Using Pokeys57cnc and UCCNC software
Does anybody know if these two are compatible (POKEYS57CNC, UCCNC) or know of any plugin or future coming? This would be great!
Similar Threads:
Re: Using Pokeys57cnc and UCCNC software
No, UCCNC can only use CNC Drive boards.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Using Pokeys57cnc and UCCNC software
Use MACH3 or MACH4 with the PoKEYS57CNC. I have MACH4 and have been very happy with the PoKEYS.
Re: Using Pokeys57cnc and UCCNC software
You can use the uc100, uc300eth and uc400eth with the uccnc.
uccnc is superior to mach3 and 4, but these controllers also work with mach3 and 4. It is up to you what software you use.
The pokeys only work with mach3 and 4 as far as i know.
