I have bought DSP Controller (RZNC-501). I use flash disk to run my U-files. I found out that there is a USB slot at the bottom, I tried to plug it with a usb cable, and windows started to look for the software, but i don't have any software for it. Does anyone have the driver or host program of the RZNC-501? just in case there is one, i think it would be more convenient to use it rather inserting the usb flash disk.
Similar Threads:
if you like I have the program and the driver
I have a CNC type OAKE 1224 and is no possible to run 22000 rmp now the machine run 10000 rpm , what kind of the machine you have? Can you send me the file to configuration it - nibbiosrl@alice.it
tell me the Email and I will sent you the software and drivers
Hi! Does anyone has the latest firmware of the DSP or can post the link of the download? Thank you very much!
will the driver and program work with the RZthnc-052XSI-070927
if so could you send it to ncmeinc@gmail.com
Thanks
please send software and drivers for rznc to
ncmeinc@gmail.com
Thanks
HARKO
hello can u please help me,my dsp rzthnc-053xsi-l30 is not working at all,i think it need the host program i have driver up to date usbcam2.2 ,my dsp was chinese i updated the main program to English,the dsp stopped and dosn't display anything at all,i can't control any thing,thank u alot ...my Email: moodi_coor@hotmail.com
hello can u please help me,my dsp rzthnc-053xsi-l30 is not working at all,i think it need the host program i have driver up to date usbcam2.2 ,my dsp was chinese i updated the main program to English,the dsp stopped and dosn't display anything at all,i can't control any thing,thank u alot ...my Email: moodi_coor@hotmail.com
I need yur help !!
I need the driver for rznc-05
rodvek@gmail.com
thank you...
i have theRZTHNC-O53XSI DSP if someone have the software and drivers
of this dsp pls help!!!!!my mail is tdrchris@yahoo.gr
thanks!
have tha RZNC 0501 DSP if someone have the software and drivers
of this dsp pls help!!!!!my mail is iftadvertisment@yahoo.com
thanks!
Khaleel
Same problem, but i bought a used RZNC 0501 and the package contains two CDs. Both are defected. Please i need at least the software. I have found USBCam2.1 driver. So i need only the software even if demo, i will buy it later.
abkar_6809@hotmail.com
Hi
I can install the drivers and such but the program setup seems to do absolutely nothing.
if someone could hook me up with the program that'd be greatly appreciated.
cheers!
ryan@rammpro.com
hi
i would like these files if u can please
A_M_I_R_O_@hotmail.com
hello masters!
i have a sx-1325e machine and i have a problem with a new "rznc-0501". i connected the usb and installed the "usbcam.inf". the driver ok, but when I try to open "ZHBUSBConnect_E.exe" it shows me a message:
"Can not identify USB communication protocol, please contact dealer and employ latest version!"
then after pressing "OK" i get another message:
"Failed to create empty document"
and it doesnt open the program, what can i do?? Can you send me the program and drivers please? my email is andidemiraj@yahoo.com
Best regards
Andi Demiraj
if anyone from this thread can e-mail me the "ZHBUSBconnect" program for this dsp, it would be very much appreciated.
Thanks in advance
Lenny,
lee@fleetgrafix.co.uk
hi also i have that kind of problem my controller is not working also can u pls give me the software thank you very much
heres my email ... melenciolacambra@yahoo.com.ph
Dear All,
I have bought laser cutting machine from china. Comes with RZTHNC-06 & DSP Controller.
Was working fine for 1 year. Now Recently we got problem with DSP.
Yesterday the machine was running ideal (Not cutting) suddenly laser beam comes out without operation of laser.
I have switch off complete machine immidetly, after a while i have turn it ON.
But now problem starts...
DSP got blank, can not operate anything...
My supplier doesn't answer me. Please help me!!!!!!
Please mail me at shreejicutbend@yahoo.com or shreejicutbend@gmail.com