HI
I bought a cnc lathe with an AB osai control on it and i have a manual and know how to change parameter from the control.
So if you need help just ask
I have a customer with several Osai 8600 controllers.
Does anybody have a service manual in order for me to change parameters and save and reload machine data.
Similar Threads:
- Need Help!- Osai A-B 8600
HI
I bought a cnc lathe with an AB osai control on it and i have a manual and know how to change parameter from the control.
So if you need help just ask
I would have "AB Series 8600 characterization Manual"Pls. let me know if you still need
dears
i need urgently procedure for load characterization file
need machine data backup due to battery failure i havnot good one
need software used for that or can load it manually
i have vega cnc turn machine with osai 8600 t
pls send me data on my email
engmonir_mohdy@yahoo.com
dear could you contact me via email
i have cnc turning machine with same control have many proplem need help
my email is ENG MONIR_MOHDY@YAHOO.COM
Hi
I have a allen bradly cnc controller 8601G os v1.8U.
When turn on controller, display a page that show Auto Test on the screen. also end of page show:
cpu: y video: y 82287:y TTC:y
Eprom: 0001 cmos:yy
but with any key on keyboard dont change screen and freez the page.
please Help me about problem.
I dont have any document for cnc controller A-B 8601G. please send document or user manual about this controller.
m.rezaei@gitco.ir
daneshyaran@yahoo.com
mrhamedmozafari@gmail.com
Thanks.
Hello
I have a allen bradly cnc controller 8601G os v1.8U.
When turn on controller, display a page that show Auto Test on the screen. also end of page show:
cpu: y video: y 82287:y TTC:y
Eprom: 0001 cmos:yy
but with any key on keyboard dont change screen and freez the page.
please Help me about problem.
I dont have any document for cnc controller A-B 8601G. please send document or user manual about this controller.
m.rezaei@gitco.ir
daneshyaran@yahoo.com
Thanks.
could you please help us about 8600 characterization forme
Hi
I need OSAI 10 5axis post for any cam software.
Thanks
Telegram = @mj_amiri
email : ngmajid@gmail.com