Anilam 1400m software recovery


Results 1 to 9 of 9

Thread: Anilam 1400m software recovery

  1. #1
    Registered JohnHennessy's Avatar
    Join Date
    Aug 2015
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Anilam 1400m software recovery

    I have a HH Roberts mill with an Anilam 1400m control. The hard drive fried and the backup I have had for a few years is corrupt. I've got a couple of call's into Acu-rite leaving messages but have not had a response as of yet. I was wondering if anyone here has bought set up disk for an outdated control such as this before? The software on the hard drive is recovered all I need is the dos version they put on these machines. Everything in the root directory is non recoverable...

    Similar Threads:
    The end result is directly connected to the effort applied


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 1400m software recovery

    I have a copy of DOS 6.22 if that would help

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Registered JohnHennessy's Avatar
    Join Date
    Aug 2015
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 1400m software recovery

    Quote Originally Posted by Jim Dawson View Post
    I have a copy of DOS 6.22 if that would help
    Jim, thanks for the offer. I just got an email from Anilam with links to download Rom Doss and the control software... They were very helpful..

    The end result is directly connected to the effort applied


  4. #4
    Registered
    Join Date
    Sep 2004
    Location
    USA
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 1400m software recovery

    JohnHennessy,
    Do you still have the email or links address from Anilam? I am trying to install a new hard drive in our Anilam 1400 mill control. Please reply, message or email to sbprecision@yahoo.com Thank you!



  5. #5
    Registered JohnHennessy's Avatar
    Join Date
    Aug 2015
    Location
    United States
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 1400m software recovery

    Quote Originally Posted by sbalder View Post
    JohnHennessy,
    Do you still have the email or links address from Anilam? I am trying to install a new hard drive in our Anilam 1400 mill control. Please reply, message or email to sbprecision@yahoo.com Thank you!
    I just sent it.

    The end result is directly connected to the effort applied


  6. #6
    Registered
    Join Date
    Sep 2004
    Location
    USA
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 1400m software recovery

    Thank you very much!!!!!!!!



  7. #7
    *Registered User* Oldtinrods's Avatar
    Join Date
    Dec 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Would anyone by chance have a link to the software still? I am helping a buddy work on a machine in a machine trades class with a bad drive and corrupt floppy disks. Thank you



  8. #8
    Member Gunmachinist's Avatar
    Join Date
    May 2020
    Posts
    252
    Downloads
    0
    Uploads
    0

    Default

    That link would be helpfull is someone would post it, if it still works.



  9. #9
    Member themetalbarn's Avatar
    Join Date
    Nov 2007
    Location
    usa
    Posts
    9
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by Oldtinrods View Post
    Would anyone by chance have a link to the software still? I am helping a buddy work on a machine in a machine trades class with a bad drive and corrupt floppy disks. Thank you
    I have the same thing today. Does anyone have any advice on this, other than searching through post after lost to try and find info. Have a Fryer machine, decided to reboot using Anilam original disk and now it says corrupt. Any help? Thanks!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anilam 1400m software recovery

Anilam 1400m software recovery