Delta Tau Tools, hate windows so much, built my own


Results 1 to 1 of 1

Thread: Delta Tau Tools, hate windows so much, built my own

  1. #1
    Member
    Join Date
    Dec 2016
    Location
    United States
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Delta Tau Tools, hate windows so much, built my own

    Don't ask how or why, but I had to setup and configure some (old) Delta Tau controllers without benefit of their configuration software. So, I built my own. It run's on a Raspberry Pi running Ubuntu Mate 16.04. It's written in Ruby.



    I have no idea if this is useful to anybody else. I did this a while ago, then I had to set up newer Turbo/PMAC2/UMAC hardware. The tool worked on the much newer hardware as well.

    If anybody is interested let me know.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Delta Tau Tools,  hate windows so much, built my own-screen-shot-2018-01-08-8-45-a  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Delta Tau Tools,  hate windows so much, built my own

Delta Tau Tools,  hate windows so much, built my own