Anilam 3300 offline software

[Ubatoid]

Has anyone got a copy of the offline programming software for the above ? We have just acquired a 3 axis with this control and would like to integrate it with DXF files.

Similar Threads:

• Need Help!- Need Anilam 3000 offline software
• Anilam 4200t Offline software, anyone have it?
• Need Help!- Anilam 1400 offline software or similar
• anilam offline software
• anilam 3300 help

[springer-]

I found the download here... Mechanical Engineering Lab - cnc

About half way down the page you will find the download link and the instructions to install it.

Depending on your operating system (anything after Windows XP) you will likely have to install a program called DosBox. You can download it here... DOSBox, an x86 emulator with DOS

Install it. Then you need to configure it to make it easy to run the Anilam offline program.

Go to "Start" button and then "All Programs"
Find "DOSBox-0.xx" program folder and click it to open
Then click on the "Options" folder
Then click on "DOSBox 0.xx Options"
Note: if it doesn't open and asks you to select a program, pick "Notepad"
When that opens, scroll to the bottom and you'll see [Autoexec] section
Add the lines below

mount c c:\p3m
c:
runcnc.bat


Save the file
Now run the icon on your desktop named "DOSBox 0.xx"

[Ubatoid]

That's awesome, thanks very much. Some good info there.
Thanks again

[sitio]

interesting

[velax1]

I tried to use the link above, Mechanical Engineering Lab - cnc, to download the Anilam 3300 offline software. It is now stale. Anyone have another place to get the software?

[drtactical]

Hi Velax1, I have the software if you send me your email, I will send.

[velax1]

Hi Velax1, I have the software if you send me your email, I will send.

Thanks for the reply. I have been busy with things around the house and just got back to the mill. My email is velax1@att.net.

Randy

[markems0]

Hi Did you get the offline software?

[cowboysam777]

hi do you still have the Anilam 3300 offline programing software? if so could you send it too me ? huber573@gmail.com

[drtactical]

Hi Cowboysam, I sent you an email and a dropbox link. let me know if you get it.

[Doc-mellow]

Hi drtactical hope you can help me out
any chance you could send me a copy of the Anilam 3300 offline software
my copy that i had on floppy disk has been corupted & will not load

best regards kev

send to kevin.brinklow@gmail.com