NO Relay comes on breifly when power is turned on


Results 1 to 2 of 2

Thread: NO Relay comes on breifly when power is turned on

  1. #1
    Member
    Join Date
    Oct 2009
    Location
    US
    Posts
    79
    Downloads
    0
    Uploads
    0

    Default NO Relay comes on breifly when power is turned on

    As stated above, my relay board turns on all NO connections when power is supplied to the load. I've put a 10 second delay on the power to the board but it seems to be coming from the load side. This opens my ATC dropping the tool, turns on the mist and flood, extends the toolchanger rack into the spindle if it's down and generally wreaks havok. Any suggestions?

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5648
    Downloads
    0
    Uploads
    0

    Default Re: NO Relay comes on breifly when power is turned on

    The power on sequence should be as follows: Computer power, delay everything else until stable. Then Control power. Then E-stop release. Then servo/system enable.

    In other words, you should have a manual switch/relay to supply power to the outputs that you switch on after the computer is stable. It is pretty common that the computer will come up in an unstable state and may have the outputs turned on from a cold boot.

    I have my E-stops wired to supply power to some outputs on E-stop release, others are not supplied until the enable button is pressed. The E-stop button/relays kills supply power to all outputs.

    Last edited by Jim Dawson; 06-28-2022 at 03:17 PM.
    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NO Relay comes on breifly when power is turned on

NO Relay comes on breifly when power is turned on

NO Relay comes on breifly when power is turned on