Connecting PSU’s for Stepper/BOB


Results 1 to 3 of 3

Thread: Connecting PSU’s for Stepper/BOB

  1. #1
    Member kolias's Avatar
    Join Date
    May 2009
    Location
    Canada
    Posts
    1326
    Downloads
    0
    Uploads
    0

    Default Connecting PSU’s for Stepper/BOB

    Not sure if the attached schematic is good but I want to save space the wiring is taken in my control panel and thought to combine one feed to supply power to two PSU’s.

    Is this acceptable?

    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Connecting PSU’s for Stepper/BOB-psu-wiring-jpg  
    Nicolas


  2. #2
    Member
    Join Date
    Jan 2018
    Location
    United Kingdom
    Posts
    1516
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by kolias View Post
    Not sure if the attached schematic is good but I want to save space the wiring is taken in my control panel and thought to combine one feed to supply power to two PSU’s.

    Is this acceptable?

    Thanks

    I think most are normslly like that.
    Mine has a 60vdc, a 24vdc, and a 5vdc connected to a 10A mcb.



  3. #3
    Member kolias's Avatar
    Join Date
    May 2009
    Location
    Canada
    Posts
    1326
    Downloads
    0
    Uploads
    0

    Default Re: Connecting PSU’s for Stepper/BOB

    Thanks for your time mate,

    Cheers

    Nicolas


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Connecting PSU’s for Stepper/BOB

Connecting PSU’s for Stepper/BOB