It has been a bit since I have been on here. My "Skubarouter" I built has machined its first 44gallon trashcan of aluminum/brash shavings. I haven't had much of an issue other than inputs vibrating loose causing a little noise and then I redid the belt drive system. Now I am working on a new machine.

I am looking at working with O-Drive and their ability to work with BLDC hobby motors. I'm just not finding a whole lot of info that tells me how much of a PSU I really need to drive 3 of these hobby motors https://odriverobotics.com/shop/odri...om-motor-d5065
I plan on running at about 3000 RPM

Anyone have a simple calculation on how to figure out how large of a PSU I will need to run 3 of these toward their upward limits for machining non-ferrous?

Similar Threads: