I need help on the wiring and operation of an Index Pulser. It is a Sumtak Corp .Type E. I. P. 11286 24VDC 100rpm.

It has a total of 12 wires
1.BLUE
2.GREEN
3. YELLOW
4.ORANGE
5.RED
6.BROWN
7.PURPLE
8.BLACK
9.GREEN
10.WHITE.
11.WHITE +24
12.BLACK -24

It is use on a 12 position turret tool changer on a IKEGAI AX25N CNC LATHE.
Trying to configure this tool changer on my DIY Centroid Acorn software. All movements on the turret is control with hydraulic vary solenoids which is not a problem.
Any help on the output signals from this index pulser would really be appreciated.

JOHN
P.S. Don't have any documentation on the lathe.

Similar Threads: