pricing question


Results 1 to 9 of 9

Thread: pricing question

  1. #1
    Member
    Join Date
    Mar 2012
    Location
    USA
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default pricing question

    Hello All,
    I need some help/suggestions on pricing. I've attached a DXF of what the customer wants cut out of .063 aluminum. I need to save all the letter holes to be installed on a background later.
    Any help would be greatly appreciated.
    Using a CNCRouterParts Pro 4896 with a 2.2kw spindle.

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Registered
    Join Date
    Jun 2014
    Posts
    777
    Downloads
    0
    Uploads
    0

    Default Re: pricing question

    Get a water jet cutting quote and add commission. Not really a job for a router imo



  3. #3
    Member
    Join Date
    Mar 2012
    Location
    USA
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: pricing question

    I agree, but circumstances dictate that I keep this job in house.
    Anybody have any guidelines/industry standards they can suggest??
    thanks



  4. #4
    Registered
    Join Date
    Jun 2014
    Posts
    777
    Downloads
    0
    Uploads
    0

    Default Re: pricing question

    maybe this will help you: Machining Cost Estimator

    But i simply Calculate machining time x (hourly rate + hourly overheads) + tooling + material + shipping + vat if registered.

    or you can use this which factors in machine wear also i believe..

    Feed and Speed Calculator for CNC Machinist's



  5. #5
    Member
    Join Date
    Jun 2005
    Location
    USA
    Posts
    1374
    Downloads
    0
    Uploads
    0

    Default Re: pricing question

    This can be done on a router with an 1/8" Three Flute Carbide endmill. Take it into CAM and get estimated run time to cut the job and use the calculator that Jon provided. If I understood you want to save the letters you cut out and put on a different background. This would mean you have to cut them with compensation on the outside for those letters, and inside to leave the holes. Not exactly sure if you are going to install all the parts cutout on another background it was unclear.

    Russ



  6. #6
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    34409
    Downloads
    0
    Uploads
    0

    Default Re: pricing question

    If you've never cut anything like that before, in that material, be prepared to do it multiple times to get it right.

    If I was experienced in cutting that material on my machine, then somewhere between $100-$200.

    If I'd never cut that material before, I wouldn't do the job.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #7
    Registered
    Join Date
    Jun 2014
    Posts
    777
    Downloads
    0
    Uploads
    0

    Default Re: pricing question

    I agree with Ger was thinking £90+ material which puts it around the upper end of Ger's estimate.

    The problem with routing thin sheet is one finding a suitable grade of aluminium, if it is 1050 then walk away. But the biggest issue is workholding, with that part there is no holes that can be used initially for fixing down unless you maybe cut one letter and then fix through the letter. Otherwise you need a vacuum bed or that sheets going to vibrate like crazy and lift. It is doable but it could easily become a complete pig of a job.

    In an ideal world I'd factor in the price of two specialist aluminium cutting 2flute spirals, endmills gum up easier. But your going to want to price for at least one.



  8. #8
    Member
    Join Date
    Jan 2006
    Location
    canada
    Posts
    2
    Downloads
    1
    Uploads
    0

    Default Re: pricing question

    cuts great with single flute endmill 1/8 at 1200 mm / s feed rate spindle rpm should be around 18000. For lubricant, I use Canola oil. Corn oil or vegetable oil sticks. $1.00 Carbide 1/8 bits from Ebay are adequate.... I use a vacuum table. Use bridges if you have no vacuum table and lower feed rate. finish is great with no or very little burr.

    With cut feed rate tool and lubricant, you should be able figure out your price.

    Best Regards,
    Alain Pelletier
    [URL=http://www.wrobots.com]wrobots.com[/URL]


  9. #9
    Member peteeng's Avatar
    Join Date
    Jul 2018
    Location
    dum dum
    Posts
    635
    Downloads
    0
    Uploads
    0

    Default Re: pricing question

    Hi Alevitt - I suggest you do it as an engraving. A material supplier can provide anodised aluminium and then you just engrave the figures vs cutting them. You are going to have a major problem catching the little island parts undamaged unless you double sided tape the entire back surface. Peter



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

pricing question

pricing question