Five Axis Machining in Brass on a Hyrel Hydra


Results 1 to 3 of 3

Thread: Five Axis Machining in Brass on a Hyrel Hydra

  1. #1
    Member
    Join Date
    Dec 2012
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Five Axis Machining in Brass on a Hyrel Hydra

    Yes, it's also a 3D Printer.





  2. #2
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1662
    Downloads
    0
    Uploads
    0

    Default Re: Five Axis Machining in Brass on a Hyrel Hydra

    0:46 "we don't want in metal chips getting in the bearings or ball screws"
    1:33 cuts chips a few inches from exposed electronics

    Anyone who says "It only goes together one way" has no imagination.


  3. #3
    Member
    Join Date
    Dec 2012
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default Re: Five Axis Machining in Brass on a Hyrel Hydra

    We've never had a problem with it, but you do make a point. Most of our users aren't actually machining metal with their printers - but some do want to.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Five Axis Machining in Brass on a Hyrel Hydra

Five Axis Machining in Brass on a Hyrel Hydra