Glad to do it, sorry so long though.
Hoss
its nice to see the project from start to finish some times when u show up late to school its hard to catch up thankyou
Glad to do it, sorry so long though.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
Astak Mole?
A lazy man does it twice.
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
When it gets dark I'll make a little video so I can show the night vision too.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
This is definitely my next printer build, can't believe I never noticed it before even though
it came out months ago on thingiverse. Rostock (delta robot 3D printer) by Johann - Thingiverse
Started printing the parts today, need to take inventory of what I have already, likely
only need another RAMPS so I may get the cheap one on ebay this time.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
Hoss, your 'Zone threads are like a drive-by hit of the cool stuff.
Had no idea the WiFi cameras were so cheap with pan/tilt and that 3D printer rocks!
Thanks,
BW
Try G-Wizard Machinist's Calculator for free:
http://www.cnccookbook.com/CCGWizard.html
Thanks, I like my gadgets. The printer above won't be the most rock solid but it's way cool
and his prints look good, and BIG.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
I have to admit I'm very tempted by that, just to see it run. Look forwards to your build.
I have one of the $140 complete RAMPS from eBay, it's as we'll put together as either of the US sourced ones I have, has the advantage they actually soldered all of the pin headers which is a big plus if you want to use something like the panelmax.
Only downsides I can see are that the heated bed MOSFET doesn't have a heat sink, and the resettable fuses look like a different part than on the US ones.
also came with an SDRAMPS, and since I pretty much run exclusively from SDCARD these days it's nice to have another.
Sent from my iPad using Tapatalk HD
Got a link or ebay store name for the ramps?
I lost my bookmark.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
This is the one I have
http://cgi.ebay.com/ws/eBayISAPI.dll...ht_3703wt_1202
Sent from my iPad using Tapatalk HD
Thanks!
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
Done ordered.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
They had 7 available/ 3 sold when I got mine so 10 total.
You're good to order one.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
Thanks for the link and thanks again Hoss for the support.
http://cgi.ebay.com/ws/eBayISAPI.dll...ht_3703wt_1202
I ordered one and this should be the last piece of the puzzle to put my ORD Bot Hadron together. I have the MakerGear Stepper Plastruder and hot end and my LAVA heated bed is in the mail. Now I just have to sit and wait for the rest of the parts to arrive.
Of course now you have shown me the Rostock delta and my brain is off on that tangent; redesigning the pivots, etc. I can hardly wait to see what you do with it, Hoss.
Randolph
The ramps kit came today already! Came with a free 40mm fan, still have to power it up and test.
Only complaint is 3 of the driver heat sinks popped off but that's nothing to fix.
Hoss
Gosh, you've... really got some nice toys here. - Roy Batty -- [URL]http://www.g0704.com[/URL]
The height of the rostock owl got me wondering if you normally turn off the bed heater after a certain build height to save on elect?