G540 SPECIAL


Page 1 of 6 1234 ... LastLast
Results 1 to 12 of 69

Thread: G540 SPECIAL

  1. #1
    Gold Member
    Join Date
    Mar 2003
    Location
    United States
    Posts
    2839
    Downloads
    0
    Uploads
    0

    Default G540 SPECIAL

    Hi,

    We did a 500-unit custom G540 run for a client. We run a 10% overage for custom units to insure the contracted for amount passes test. This run all 550 passed test so we have 50 custom G540 REV4s left over.

    The client needed hex DB9 connectors whose posts are 0.05" shorter than our round DB9 and DB25 posts. That is the only difference (see attached jpg). The screws in our standard DB9 mating shells are too short to mate with these sockets.

    We will sell them at our 50 quantity price ($225) in singles or for the whole lot. Contact sales@geckodrive.com. They will not appear on our website for purchase.

    Mariss

    Similar Threads:
    Attached Thumbnails Attached Thumbnails G540 SPECIAL-hex-g540-jpg  


  2. #2
    Registered
    Join Date
    Dec 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Email sent!



  3. #3
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default

    >> The screws in our standard DB9 mating shells are too short to mate
    >> with these sockets.

    Are the DB9 connectors still included? I can find new screws.

    I want to do a cnc lathe conversion in the near future so I am considering buying one now. Hopefully I will get around to it before the warrenty expires!

    chuck



  4. #4
    Member
    Join Date
    Jun 2007
    Location
    canada
    Posts
    3567
    Downloads
    0
    Uploads
    0

    Default

    boooo!


    i just bought one last week. i never get the sales.



  5. #5
    Registered
    Join Date
    Jul 2003
    Location
    california
    Posts
    574
    Downloads
    0
    Uploads
    0

    Default

    do i e-mail or PM or go though the gecko web page?



  6. #6
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    3
    Downloads
    0
    Uploads
    0

    Smile

    We would like to order several.



  7. #7
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1403
    Downloads
    0
    Uploads
    0

    Default

    My emailed request to be billed through paypal has gone unanswered.
    Email sent Friday.
    Maybe these are sold out ? Sales desk took Monday off ?

    edit/ If it's a case of being a bit backlogged I hope it's first emails get first service ?

    Anyone who says "It only goes together one way" has no imagination.


  8. #8
    Registered port_huon's Avatar
    Join Date
    Dec 2007
    Location
    Australia
    Posts
    362
    Downloads
    0
    Uploads
    0

    Default

    Paypal is one of the standard payment options on the Gecko website.
    Sales were definitely at work on Monday as I got a reply to my questions.

    Order placed today before the $A falls any further

    Regards
    Geoff


  9. #9
    Member
    Join Date
    May 2005
    Location
    canada
    Posts
    1403
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by tumutbound View Post
    Sales were definitely at work on Monday as I got a reply to my questions.
    Thanks for that. Maybe my request fell into some internet black hole.

    Order placed today before the falls any further
    Feel your pain. Canadian peso in use here.

    Anyone who says "It only goes together one way" has no imagination.


  10. #10
    Registered
    Join Date
    Mar 2003
    Location
    Orange County, California
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default

    I called them, confirmed availability. Then I was told to just order a G540 online and put a note on the order that said "Overstock special at $225.00".

    -James

    James Leonard - www.DragonCNC.com - www.LeonardCNCSoftware.com - www.CorelDRAWCadCam.com - www.LeonardMusicalInstruments.com


  11. #11
    Registered
    Join Date
    Jun 2005
    Location
    USA
    Posts
    205
    Downloads
    0
    Uploads
    0

    Default

    My special price G540 arrived yesterday, but I didn't have time to try it out until this morning.

    It's a winner! I hooked it up to an Oriental Motor PK268-02A motor, half-coil, 2A, 48VDC, and that combination is very, very nice.

    I've tested it at various speeds from 100 RPM to 1,344 RPM. Smooth and quiet.

    Now the problem is going to be finding a good application for the other PK268-02A motors that I have on the shelf.



  12. #12
    Registered Crevice Reamer's Avatar
    Join Date
    Mar 2008
    Location
    USA
    Posts
    3655
    Downloads
    0
    Uploads
    0

    Default

    Just ordered mine.

    CR.



Page 1 of 6 1234 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G540 SPECIAL

G540 SPECIAL