I’d suggest the G540 4-axis controller. It should be fine for that size machine.
https://www.homanndesigns.com/index....products_id=80
Cheers
Peter
Sent from my iPhone using Tapatalk Pro
I have an old Maxnc 15CL that I've had for a long time. It's starting to get twitchy so I' considering changing over to everything Gecko. What is recommended as far as board, drives, etc. Remember I'll want to convert the 4th axis as well.
Similar Threads:
I’d suggest the G540 4-axis controller. It should be fine for that size machine.
https://www.homanndesigns.com/index....products_id=80
Cheers
Peter
Sent from my iPhone using Tapatalk Pro
-------------------------------------------------
Homann Designs - http://www.homanndesigns.com