Mach3 is moving too far like scale is off


Results 1 to 1 of 1

Thread: Mach3 is moving too far like scale is off

  1. #1
    Member
    Join Date
    Nov 2017
    Location
    United States
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Mach3 is moving too far like scale is off

    I have configured my axis correctly I think. In settings I ran the calibration and wanting to move 1" it does move 1". When I load my cut file the machine is moving too far and coming off of the board like it is moving 1-1/4" instead of an inch. Maybe it is the post processor I am using...I don't know. I am using Mach2/3 processor to generate my gcode. I am using Nema 23 steppers and Gecko G540 driver. I just got the Gecko and this is the first try and it is really making me nervous that I can't get it to work.

    The picture in the window of what it is supposed to be cutting looks correct, the machine is just moving too far.

    Thanks for any help

    Similar Threads:
    Last edited by MP40cal; 08-15-2020 at 06:34 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mach3 is moving too far like scale is off

Mach3 is moving too far like scale is off