- Adding a rotary
-
Member
Adding a rotary
Thinking of adding a rotary axis to my machine and looking for some suggestions.
Right now I use the UCCNC ETH400 with port 1 going to a Gecko G540. All 4 ports are used.
I would like to add the 5th drive to eth400 port 2.
My initial thought was to add a gecko G250x since that's what the G540 uses, but then I thought maybe I'll try for some ideas from people with a similar setup.
Anyone have thoughts on this?
Similar Threads:
-
- Adding a rotary
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules