- Using relay w/ G540 - 5v or 36v coil
-
Member
Using relay w/ G540 - 5v or 36v coil
New to electronics, and I want to use relays to turn on my router motor and dust collector. My power supply outputs 36v and 5v, wondering if there is any reason to get a relay with 5v coil or 36v coil?
I'm looking at a T9AP1D52-36-01 relay, is this a good choice?
Similar Threads:
-
-
Member
Re: Using relay w/ G540 - 5v or 36v coil
It looks to me like that relay would work. Stick with 36v if you have that power supply. Otherwise you end up like me with 4 different power supplies in my case.
-
Member
Re: Using relay w/ G540 - 5v or 36v coil
Thanks for the reply.
I actually have both 5v and 36v on the oem power supply of my Techno Davinci router, was just wondering if there was a reason to use one over the other,
-
Member
Re: Using relay w/ G540 - 5v or 36v coil
why not a 48V relay ?
then you can use the G540's 48V supply
what are you controlling with the relay ?
John
-
Member
Re: Using relay w/ G540 - 5v or 36v coil
I'm using 36v for the Gecko, could use that for the relays.
Controlling router motor and dust collector
- Using relay w/ G540 - 5v or 36v coil
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules