Not sure about the parameter, but if you want to lock the spindle from spinning and orient it, it's M19 in the program, or from MDI.
I run a okuma-howa 35-l with a fanuc 18-t control.I need to know if anybody knows the parameter to set this and what is the code used in a program to lock and unlock the machine.Thank you any help will be useful.
Similar Threads:
- Problem- LMS SX2 Spindle Lock Stripped
- Need Help!- Spindle Lock code???
- Need Help!- Spindle lock
- Code to lock feedrate?
- Spindle Lock for SX3
Last edited by fisholie; 11-04-2004 at 06:37 AM.
Not sure about the parameter, but if you want to lock the spindle from spinning and orient it, it's M19 in the program, or from MDI.
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I tried the m-19 but it did not do anything.I want the spindle to lock completely again thanks for all input I get.If anyone else knows something that might work please let me know.Thank You.
Did you stop the spindle with an M5 before using the M19?
Bill
Where did you put the M19 in? In the program? In MDI?
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi,
excuse me but i'm italian and i don't speak a good english...
M19H0
or H90 ,H180,H270 for spindle position...
The okuma manual should tell you what functions and M codes etc they have implemented. Fanuc have Many many pre-assigned functions and it is up to the Machine tool builder to use them (or not) how he sees fit.
For example all M codes and special functions which can be set by a simple switch such as MLK (machine lock) are implemented through the I/O or ladder section and are machine-tool-builder dependant, they cannot usually be set by parameter.
There is a whole raft of Fanuc manuals that the end-user does not usually get, he usually gets the Operator manual & Maintenance manual if he is lucky, some times he just gets the Machine tool builder version.
Just to confuse things but are usefull, Fanuc have an OperatOR as well as a OperatION manual, and a ConnecTION & ConnectING manual as well as Servo man. & others which can be usefull for trouble shooting etc.
Al
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
M19 won't work if the chuck is open. Close the chuck (with or without any work-piece in it) and try M19 in the MDI again.
9 Year old thread!! ??
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Good idea.
Has anyone got an answer I keep getting 2338 alarm for” spindle orientation no spec “every time I use M 19 to lock the spindle