Haas Mill Probing Offset

[dankillough]

Looking to use probe in routine to set offset. I have it all worked out to probe a bore and set X0 and Y0, but I need that position to be X-4.0
Here is what I have, how to I adjust it X-4.0????

N1 (STEP 1, PROBE G154P13)
G154 P5
G91 G28 Z0
G90
G00 X-4.50 Y0.
T1 M06
G00 G90 G43 D1 H1 Z2.

G65 P9832 (PROBE ON)
G65 P9810 X-4.5 Y0. Z0.2 F30. (PROTECTED MOVE TO POSITION FOR PROBING)
G65 P9814 D0.385 Y0.0 Z-0.2 S154.13 (CENTER IN HOLE)
G65 P9810 Z2. F50. (PROTECTED MOVE UP IN Z)
G65 P9833 (PROBE OFF)
G91 G28 Z0
G90
M01
N101

Similar Threads:

• Probing, Mach3, touch plate, G54 Z offset
• Haas mill stops moving when using tool offset and cutter comp
• Need Help!- variables when probing on haas super mini mill
• renishaw probing on haas mini mill
• multiple offset probing

[eckitsch]

(Move coordinate G154.13 4.0 to the left) ;
G10 L20 P13 G91 X-4.0 ;