Machine/Operator/fixture ID program -Inch/ 28 machines-twin pallet four fixtures

[lshingleton]

%
O0900(ID-BOLT HOLE ARC)
#11=#530(MACHINE ID#)
#14=3.230(RAD)
#15=10(START-A)
WHILE[#11GT0]DO1
#15=#15+3
#5=#14*SIN[#15]
#6=#14*COS[#15]
G00G90G99G81X#5Y#6R0.620Z0.5060F15.0
#11=#11-1
END1
G80G90
()
#11=#101(FIXTURE ID)
#14=3.1100(RAD)
#15=10(START-A)
WHILE[#11GT0]DO1
#15=#15+3
#5=#14*SIN[#15]
#6=#14*COS[#15]
G00G90G99G81X#5Y#6R0.620Z0.5060F15.0
#11=#11-1
END1
G00G80G90Z2.0
()
#11=#514(OPERATOR ID-FIRST NO.)
#14=3.230(RAD)
#15=47(START-A)
WHILE[#11GE50]DO1
#15=#15+2
#5=#14*SIN[#15]
#6=#14*COS[#15]
G00G90G99G81X#5Y#6R0.620Z0.506F15.0
#11=#11-10
END1
G80G90
()
#10=#11(OPERATOR ID-FIRST NO.)
#14=3.110(RAD)
#15=47(START-A)
WHILE[#10GE10]DO1
#15=#15+2
#5=#14*SIN[#15]
#6=#14*COS[#15]
G00G90G99G81X#5Y#6R0.620Z0.506F15.0
#10=#10-10
END1
G00G80G90Z2.0
()
#9=#10(OPERATOR ID-SECOND NO.)
#14=3.230(RAD)
#15=83(START-A)
WHILE[#9GT5]DO1
#15=#15+2
#5=#14*SIN[#15]
#6=#14*COS[#15]
G00G90G99G81X#5Y#6R0.620Z0.506F15.0
#9=#9-1
END1
G80G90
()
#8=#9(OPERATOR ID-SECOND NO.)
#14=3.110(RAD)
#15=83(START-A)
WHILE[#8GT0]DO1
#15=#15+2
#5=#14*SIN[#15]
#6=#14*COS[#15]
G00G90G99G81X#5Y#6R0.620Z0.506F15.0
#8=#8-1
END1
G00G80G90Z2.0
M99

%

Similar Threads:

• Gcode with 2 fixtures with pause in between fixture setup
• Tormach twin vise and fixture plate
• Parameters for Matsurra RAIII DC twin spindle twin pallet VMC with Fanuc control
• Eagle 560 Twin Pallet Limit Switches
• needed twin pallet changer program