Ramped V-cut G code

[ratucker64]

I need to make a cut useing a V-bit.
Y axis is fixed and the X axis travels 400mm
During this cut the Z axis starts at 0 and ends at -4mm
Is there an example on how to do this in G code? Or is it more complex then that?

Thank you,

Robert

Similar Threads:

• G code to cut inside groove
• Need Help!- Possible to have a Ramped entry on a Profile?
• How to construct a ramped spiral object
• ramped arcs are linear points no g2
• Cut part render, and G code

[Jim Dawson]

G0 X0.0 Z0.0
G1 X400.0 Z-4.0 F100
G0 Z0.0

[ratucker64]

Thank you Jim,
This worked just as I was hoping for!!!

Robert

[Jim Dawson]

Glad it worked for you. Happy to help.