Make sure spindle is turning when you try the commands
I think you've got to adjust your parameters.... This was on another site helping somebody with a similar problem...
"try M21 advance M22 retract but you will have to adjust a setting in your parameters. I forget which one it's in the 90's or 100's. hope this helps"
If that don't do it... http://www.fanuc-spares.co.uk/fanuc_parameters.htm
this website might be worth looking at for kicks..
Make sure spindle is turning when you try the commands
I wasn't able to get that link to work. Any update on the parameter number that needs to be adjusted? I have a Mori so it should be M25/26 but maybe I need to enable something?
Thanks,
Ben
hi, for my SL 25 b1000 with fanuc 10TF, I use M21 and M22 for tailstock
Ikegai TU15, fanuc 10T, M34 and M35
- - - Updated - - -
Ikegai TU15, fanuc 10T, M34 and M35
That's what I've found, definitely have M5 before moving quill in either direction.
Need help how can I move the tail stock on a snk sut-70
Need to move away from spindle
Watch and download Korean drama, movies, Kshow and other Asian dramas with english subtitles online free. Dramacool for everyone! 9 anime online