Did you mean to attach drawings or something? You're not giving us much to go on.
Hey all,
I've been working on this for quite some time and really could use some help/advice. We use discriminator to program these and this practice question has me hitting my head against the wall. The CamInstructer website is pretty horrible in my opinion and have a hard time learning anything from it.
Did you mean to attach drawings or something? You're not giving us much to go on.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
For some reason the attachments did not work. Let me try again.
Last edited by Jim Dawson; 04-21-2021 at 01:03 PM.
Jim Dawson
Sandy, Oregon, USA
https://imgur.com/W90OO1p
https://imgur.com/rCCUFA4
Here is what I have so far, the tough part for me are the triangle pockets and if there is a way to change the diameter of the holes that I drill using g83? The depth of the different circles I am not sure of as well. Just kind of cutting the points and winging it. Any advice would be huge
G83 is a peck drill cycle. The hole size is not specified in the G code, you only need to load the proper drill for the hole, can be any size.
Are you hand coding this? Again I'll ask if you have the drawing in a STEP or IGES format.
Jim Dawson
Sandy, Oregon, USA
This should keep you busy for awhile. G code attached.
Jim Dawson
Sandy, Oregon, USA