Need Help! How to run engraving program at different depth


Results 1 to 3 of 3

Thread: How to run engraving program at different depth

  1. #1
    Member
    Join Date
    Feb 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default How to run engraving program at different depth

    I am running a 600 line engraving program on a Haas, need to run again at a different depth. Have been changing tool length comp, but loosing too much time.

    Similar Threads:


  2. #2
    Member lucaswalker's Avatar
    Join Date
    Sep 2018
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default re: How to run engraving program at different depth

    Add G92 Z-10 (Or Z-Whatever you need)
    It should shift the Z coordinates and run all the nc accordingly

    Make sure however that all your rapid moves are still above material, or at least inside the pocket you already performed.



  3. #3
    Member
    Join Date
    Feb 2017
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: How to run engraving program at different depth

    Thanks Lucas for taking time to help. Will try it today.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to run engraving program at different depth

How to run engraving program at different depth