Newbie G Code for setting Z Axis


Results 1 to 1 of 1

Thread: G Code for setting Z Axis

  1. #1

    Default G Code for setting Z Axis

    Hi,

    I have a 6040 USB router. The G code for setting Zero Z that came with the machine didn't work. Someone on this site sent me a new program. With this one, my bit goes down and touches the probe, but then it goes all the way to the top and sets the Zero at the top of the gantry instead of at the level of the material. I wonder if anyone could look at this file and see if there is anything that could be changed for Zero to be at the material level?

    Thank you in advance.

    Scott

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G Code for setting Z Axis

G Code for setting Z Axis