G41/G42 compensating to the wrong plane.


Results 1 to 1 of 1

Thread: G41/G42 compensating to the wrong plane.

  1. #1
    rjpurk's Avatar
    Join Date
    Oct 2019
    Posts
    0
    Downloads
    0
    Uploads
    0

    Question G41/G42 compensating to the wrong plane.

    Hello,

    I ran into some problem trying to mill a gearing wheel on my Doosan Puma 5100LMA with Fanuc Oi-F software. The machine consists of 4 axes (X,Z,C1 and C2).
    I have a driving tool that is parralel to the Z-axis and i am trying to mill out the gearing teeth.

    Code:
    N6 
    G54
    M5P11
    M35
    G28U0
    G0Z300T0G40G98 
    T02002 
    G97S3000M3P12
    G28H0
    M08
    G0X190Z10C0
    G1Z-31F1000
    G42X168
    X168C-5.44 
    X141.5C-9.94 
    X141.5C-30.06
    X168C-34.56
    X168C-45.44
    X141.5C-49.94
    X141.5C-70.06
    X168C-74.56
    X168C-85.44
    X141.5C-89.94
    X141.5C-110.06 
    X168C-114.56 
    X168C-125.44 
    X141.5C-129.94 
    X141.5C-150.06 
    X168C-154.56 
    X168C-165.44 
    X141.5C-169.94 
    X141.5C-190.06 
    X168C-194.56 
    X168C-205.44 
    X141.5C-209.94 
    X141.5C-230.06 
    X168C-234.56 
    X168C-245.44 
    X141.5C-249.94 
    X141.5C-270.06 
    X168C-274.56 
    X168C-285.44 
    X141.5C-289.94 
    X141.5C-310.06 
    X168C-315.56 
    X168C-325.44 
    X141.5C-329.94 
    X141.5C-350.06 
    X168C-354.56 
    X168C-360
    G1G40X190
    G0Z20
    The problem i'm getting with this program is that G41 or G42 compensates it's radius in the Z-axis. On default the machine is using the XZ plane (G18) but whenever i try to use G17 or G19 it is returning an error (Illegal plane select).

    Is there something wrong with my code? Or might there be a parameter that is not set right?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails G41/G42 compensating to the wrong plane.-img_20191022_080444-min-jpg   G41/G42 compensating to the wrong plane.-img_20191022_074845-min-jpg   G41/G42 compensating to the wrong plane.-img_20191022_080501-min-jpg   G41/G42 compensating to the wrong plane.-img_20191022_082458__01-min-jpg  



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G41/G42 compensating to the wrong plane.

G41/G42 compensating to the wrong plane.

G41/G42 compensating to the wrong plane.