Tom
Version to suit your lathe attached.
Last edited by Kiwi; 10-16-2008 at 07:38 PM. Reason: Removed program while updating.
hy if this popped up, then i have solution for okuma, written last year, to use a countersink on C or Y axis
infos :
... uses a linear corection parameter, so to reduce chamfer height variations
... segmentation can be controlled, so to avoid succumbing the machine with all those small movements
... compares real process time with estimated time, in order to detect if cnc was succumbed or not
... linear or procedural code
... uses HiCut-Pro
... to make it rough, simply change the inputs and raise X
* chamfer height variations are increasing with overall CorY axis travel, thus the bigger the hole and the smaller the part; if needed, custom corection function can be implemented
after i tuned it to look nice, considering that only a chamfer was needed, i simply speed it up by making it poligonal, thus reducing the number of segments; if you focus your eye, you can see those segments, but it doens't matter for the end purpose / kindly
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...