New to CNC

Results 1 to 2 of 2

Thread: New to CNC

  1. #1
    Member jpeg666's Avatar
    Join Date
    Aug 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default New to CNC

    I just bought a bobs cnc machine and built it. It's up and running. I wanted to know where I start on this journey to learn cnc machining. The machine is for wood and hard plastics. I have cut some things but I am at a loss when it comes to knowing what settings to put into easel for speeds and depth of cuts. I don't know what sounds are not good when running the machine and what good milling sounds like. It came with a Dewalt 660.

    Any information is appreciated I hope to learn a lot here.



  2. #2
    Member
    Join Date
    Apr 2016
    Location
    United States
    Posts
    739
    Downloads
    0
    Uploads
    0

    Default Re: New to CNC

    Take a look at GWizard. You'll find it here: https://www.cnccookbook.com I was in your boat three years ago. GWizard helped (and continues to help) me with feeds & speeds. They offer a free trial.

    Gary


    The Old Man and the C -----NC


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

New to CNC

New to CNC