Reply with QuoteSounds like there may be some play in your Z axis.
Need some input
Any advise please,
I have a AZYXS 5010 couple years new. We cut .25 Aluminum sheets. We also engrave logos and text. The problem we are having is that the surface does not seam to be flat. It will be ingraving along fin3 and suddenly miss or barley touch the surface. We adjust height back up and engrave the missing part. Then it continues on engraving deeper than desired. Is there a wavy surface on the aluminum? Can we order material that would be more suited to our needs? We resurface the spoil board daily.
Re: Need some input
Sounds like there may be some play in your Z axis.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
